Miscellaneous Supplies

6 Power Magnifier

Can You See It? Whether you call it a magnifying glass, loupe', or linen tester, it's one of the handiest quality control tools around. One look through this glass can tell you a story about your printing process. Every operator, supervisor, quality control person should have one. This one folds down to fit into a plastic pouch that is included. It has a one inch diameter six power glass.

Part No. A30. . . . . . . . . . . . . .  $16.30

Dan’s Key-pers . . .

Keep track of your tools with our coiled lanyards. Attach your chuck key to your drill. Fasten special tools to the bench. Stop arguments over who had the remote control last. Stop dropping expensive tools overboard.

Part No. KEYPER1 (12”) . . . . . . . .$ 3.50

Part No. KEYPER3 (3’) . . . . . . . . . .  4.50

Part No. KEYPER6 (6’) . . . . . . . . . .  5.50

Blanket/Paper Micrometer

Spring loaded with big pads on the anvils to take the variables out of measuring blankets and paper. Easy to read, calibrated in thousandths.

Part No. BLKTMIKE . . . . .  $150.00

    Breakaway Knife Unbreakable metal blade shield protects you from broken blades. Comes with 3 blades; 2 stored right

in the handle. Additional blades  available (above).

Part No. 660395 . . . . . . . . . . .  $4.15

Solvent Dispensing Squirt Bottle

This a 24 oz. squeeze bottle, just the right size to get an easy grip on, for squirting washup solvents and other chemicals. The squirt nozzle is molded into the bottle and produces a fine stream. Nozzle tip can be opened up  for heavier stream by cutting it shorter. The wide mouth makes it easier to fill. Save big when buying six or more!

Part No. WUBOTTLE . . . . . . . . $14.95

($13.95 each in quantities of 6 or more)

Formtech Length Gauges

THE Accurate Way to Check Sheet Lengths Available in several standards: -1/32", on, or +1/32" in ten feet. Takes the guess work out of length quality control. Just roll up your sample, engage the first couple of pins, and unroll across the gauge. If it falls on the pins, you can be sure that it will run perfectly on your collator. Comes with a satisfaction or money back guaranteee! Hundreds in use!

We recommend that you try the - 1/32" model; if you find you need a longer one, we'll exchange it at no additional cost!

Part No.      Description            Price

LENGTH - Minus 1/32" in 10 ft. . . . . . .   $ 190

LENGTHON - On in 10 ft. . . . . . . . . . . . .  190

We also supply standard 10 foot length gauges with 3 pins and a hole in the ends

LENGTHSTD -3 pins/hole, on in 10 ft. . . . 175

LENGTHPLUS -3 pins/hole, +1/32" in 10’. 175

  4/18/15

Stab-n-Pad

The easy way to count forms for padding, after-the-fact. Our Stab-n-Pad is adjus-table so that you can set it for just about any quantity.

Part No. W172 (2"). . . . . . . . . . . $16.50

Part No. W172B (4"). . . . . . . . . .  17.90

Part No. W172C (5"). . . . . . . . . .  19.30   

4x4 Poly Roll Revolvers

SPIN THAT ROLL OF PAPER! Takes the pain out of turning a roll. Unbreakable, slicker than snot, and priced right.

Part No. REV300MM (12”dia.) . . . . . . .  57.95

   Part No. REV200MM (8”dia.) . . . . . . .  37.95

3M Safety Walk®

The standard idler roller covering

used on most presses. Good solid covering that doesn’t mash down and cause web weave. Most difficult to keep clean 2” x 60’ roll


Part No. SW . . . . . . . .  $ 62.95   

Part No. SW1 . . . . . . . . . 42.95

2/15

Hooks

Good general purpose idler roller covering that is easy to clean. Can cause registration and web weave problems on longer presses. 2”x150’ roll.

Part No. SMH . . . . . .   $ 91.50

Loops by the foot (mount stuff when mated with leftover SMH

Part No. SML . . . . . . .  1.00/ft

2/15

Cheese Grate

Absolutely the best and most cost effective idler covering! Reduce your idler cleaning time to almost nothing. Cheapest covering, stays new for years, yet removes easily. But it’s a bear to install. Installation instructions included with every roll. 500’x1-1/2”

Part No. GRATE . . . . $ 175.00

2/15

Dan’s Key-pers . . .

Keep track of your tools with our coiled lanyards. Attach your chuck key to your drill. Stop arguments over remotes. Stop misplacing stuff.

Part No. KEEPER1 (12”) .  $ 3.50

Part No. KEEPER3 (3’) . . . .  4.50

Part No. KEEPER6 (6’) . . . $ 5.50

2/15

Natural Static Control

All copper tinsel! Mounted on press or bindery equipment, it kills static naturally by bleeding it off to ground. 72 foot roll with instructions for installation

Part No. TINSEL . . . .  $ 20.00

2/15

With clear plastic base that lets the light in on the subject. Really gets downin there to examine dots, registration, slur, spread, and other tiny stuff.

Part No. L15 . . . . . . .  $ 23.95

orders@formtechservices.comwww.formtechservices.com • Phone: 800 522-6257 • Fax: 407 957-7887

orders@formtechservices.comwww.formtechservices.com • Phone: 800 522-6257 • Fax: 407 957-7887

12532 Overlook Mountain Drive • Charlotte, NC 28216

Replacement Blades

for Break Away Knives - 50 per box.

Part No. 660371.............$12.50


Single Edge Razor Blades

100 blades per box.

Part No. 660089.............$4.95